TFC SLI VID Connector - G1/4 - 1/2/3 Slot

Super chic universal SLI/Crossfire fitting/pipe kit to connect two graphics cards without having to hassle with hose!
The kit consists of 3 different pipe lengths to suit the distance between 1, 2 or 3 PCI-E ports!

It may be difficult and cumbersome to mount the hose between the two graphics cards that sits in the SLI/Crossfire, as the tubing should not be too short or too long, as this pulls or pushes the graphics cards and bend them unnecessarily.
This kit allows you to quickly, easily and securely connect your graphics card, so you get the most optimal installation.

The tubes have an internal diameter of approx. 8mm, so you get lots of water through them, and they can be used in all kinds of systems (High Flow, Push-On or Push-In)
The thread adapters have the universal 1/4" BSPP (G1/4) thread so they can be used in virtually all products with ease.

The TFC SLI VID CONNECTOR allows a clean, safe and convenient connection between multiple full-coverage VGA water-blocks. Due to the three different lengths of the delivered pipes the connector can be used for 1, 2 or 3 slot applications. The G1/4 threads allow the connection of different video card waterblocks. Of course the connector can also be misused, for example as a connection or bridge between a reservoir and a pump.


Specifications:
Material: Brass, Nickel plated - Polished surface
Fitting Thread: Male 1/4" BSPP (G1/4)
Seal: Dual O-Ring
Max Pressure: 75 PSI/5 BAR

SLOT/PIPE 1: Space between GPU Water blocks from 18.8 to 30.2 mm
SLOT/PIPE 2: Space between GPU Water blocks from 39.1 to 50.5 mm
SLOT/PIPE 3: Space between GPU Water blocks from 59.4 to 70.8 mm

Packet content:
2 pcs thread adapters
3 pcs tubes of different lengths